Why Can Lyophilized Peptides Ship at Room Temperature?
What freeze-drying does, why a dry peptide copes with a week or two in transit, and what to do the day the box arrives.
Yes. A freeze-dried peptide in a sealed vial is a dry solid, and dry solids break down slowly. That is why peptide suppliers routinely send lyophilized material by ordinary courier without ice, and why a trip of a week or two is not a problem for most sequences. It is not a licence to leave vials on a shelf: long-term storage is still cold. This article explains the difference. Our products are for laboratory research only.
What freeze-drying does
Lyophilization freezes the peptide solution and then removes the ice by sublimation under vacuum, followed by a second drying step that removes most of the water still clinging to the solid. What is left is the white porous cake you see in the vial, with very little water in it.
Water is the point. It is the medium in which most peptide degradation happens, so a peptide with the water taken out has far fewer ways to go wrong.
Why dry means stable
Most of the common chemical routes that damage a peptide need water. Hydrolysis uses water as a reactant. Deamidation of asparagine and glutamine residues, and the oxidation that affects methionine, cysteine and tryptophan, all run much faster in solution, where molecules move freely and meet each other. In the dry cake the peptide molecules are largely held in place, so reactions that take days in water take far longer in the solid.
Temperature matters as well, because chemical reactions speed up as things warm. A cold vial lasts longer still, which is why long-term storage is at -20°C. But a few warm days costs a small fraction of the months of shelf life a sealed dry vial has, which is why transit at room temperature is acceptable and keeping the same vial warm for a year is not.
What a major peptide manufacturer says
Bachem, one of the largest peptide manufacturers, states in its handling guidelines that lyophilized peptides are rather stable. It notes that sequences containing Asn, Gln, Met, Cys or Trp have a more limited shelf life, yet says even these may be shipped at room temperature, and that its own orders typically travel at ambient temperature. For long-term storage it recommends a tightly closed container below -15°C, with lower being better.
Two caveats. Bachem's deliveries mostly arrive within one to two working days, which is shorter than an international air shipment from China. And its guidance sets no fixed number of days at room temperature, because the safe window depends on the sequence and the conditions.
How QSC ships
We ship vials at room temperature by air with DHL, UPS or FedEx. Typical delivery is 8 to 13 days door to door. Each vial holds a dry cake sealed under nitrogen, packed in a protective box. For most peptides a trip of that length is routine.
The bigger risk is delay rather than the normal journey: a parcel held in customs for weeks in a hot place is a worse case, and the sensitive sequences above have less margin. This is why we ask you to move vials into cold storage on arrival rather than leaving them out.
What to do when the box arrives
Put the vials in a freezer at -20°C for long-term storage, or in a refrigerator at 2-8°C if you will use them soon. Keep them sealed and out of light.
Before opening a cold vial, let it warm to room temperature first. Peptides tend to be hygroscopic, and opening a cold vial lets moisture from the air condense on the powder. Bachem gives the same advice and notes that absorbed moisture lowers peptide content and can reduce stability.
After reconstitution the picture changes completely. A peptide in solution degrades far faster than the dry powder, so keep it refrigerated and use it within the window your protocol sets. Our GHK-Cu handling guide shows what that looks like for one peptide.
When to look closer
Cake shape varies between batches and can shift in transit, so appearance alone is a weak signal. The certificate of analysis for your batch, which lists purity, is the reference. If a cake is visibly wet, melted or discoloured, send us a photo before you use it.
QSC also supplies sterile water and bacteriostatic water for reconstitution, in 3 mL and 10 mL 10-packs. Nothing here is a dosing or usage recommendation.
Sources
Bachem. Handling and Storage Guidelines for Peptides (Peptide Guide, chapter 08). https://www.bachem.com/knowledge-center/handling-and-storage-guidelines-for-peptides/ (accessed 9 November 2026).


